IMP Industrial Technologies

• The left jaw can slide up and down to facilitate measurement of stepped sections
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure hole center distance in the same or offset planes
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, set, mm/inch, preset (+, -)
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure width of groove inside bores
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory:  data output cable (code  7306-20, 7302-SPC5A/SPC5B, 7305-SPC2A )

• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS, data preset
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory: data output system

Additional Information:

• Item Code: 1135-601

• Absolute system
• Resolution: 0.01mm/0.0005"
• Buttons: mm/inch, ABS/REL, on/off, origin set
• Battery CR2032, automatic power off
• After automatic power off, move the digital unit to turn on power
• Data output
• Meet DIN862
• Made of stainless steel

Additional Information:

• Item Code: 1103-150

• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital
• unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure wall thickness of tubes
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure diameter of wire ropes, and thickness of soft materials like rubber, sponge, etc.
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• The blade jaws fit into small grooves
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure wall thickness inside bores and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Resolution: 0.01mm/0.0005"
• Button function: on/off, zero, mm/inch, ABS,data preset
• Battery CR2032
• Data output
• Made of stainless steel
• Optional accessory: data output cable(code 7306-20, 7302-SPC5A/SPC5B,7305-SPC2A)

Additional Information:

• Item Code: 1106-501

• Resolution: 0.01mm/0.0005"
• Carbide tips
• Buttons: zero, on/off, mm/inch
• Battery SR44 or LR44
• Data output
• Made of stainless steel

• Made of alloy steel
• Hardness HRC62-65
• Diameter accuracy: ±1μm

Additional Information:

• Item Code: 4166-6D

• Small pointed jaws fit into small grooves and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• With fine adjustment
• Made of stainless steel
• Satin chrome plated reading surface

Additional Information:

• Item Code: 1214-500

• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Meet DIN862
• Made of stainless steel

Additional Information:

• Item Code: 1108-150

Features:

• Supports requirements of linear measurement
• Used for adjusting, checking/inspecting measuring instruments and tools

Specifications:

• Material: Alloy steel
• Also used for precision workpieces
• As metal block, it comes precision ground and lapped to specific thickness
• Gauge blocks come in sets of blocks with range of standard lengths
• Offering high abrasion performance
• Offering high accuracy
• Made of high-quality stress relieved alloy steel
• Available in grade options of Grade 0 for calibration/Grade 1 for inspection/Grade 2 for workshop

• Pointed jaws fit into small grooves and recesses
• Resolution: 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Measure internal and external diameter of drum brakes
• Resolution 0.01mm/0.0005"
• Buttons: on/off, zero, mm/inch
• Automatic power off, move the digital unit to turn on power
• Battery CR2032
• Data output
• Made of stainless steel

• Optimum functionality
• Long operational life
• Technically-advancement

• Resolution 0.001mm/0.00005
• IP54 dust/waterproof
• Buttons: on/off, set, mm/inch, ABS/INC
• Data output
• SR44 or LR44 battery, automatic power off
• Carbide measuring faces
• Ratchet stop
• Supplied with extension rods
• Setting rings are included (except 200-300mm)
• Optional accessary: data output system

• Used together with gauge blocks to set bore gages

• 4 gages per set
• For small holes, slots and grooves, etc.
• Satin chrome finish

• Measure radius of internal and external arcs
• Supplied with 5 jaws for different sizes of arc
• Battery CR2032

• Rotary anvil, to measure bores with small opening
• D: bore diameter to be measured,
• d: minimum opening diameter (see right drawing)
• d=57mm (D 95mm)
• d=D-38 (D>95mm)

• 0.01mm or 0.001mm graduation dial indicator or dial comparator
• Setting ring (code 6312)
• Long handle (code 7352)

• To measure diameter of shallow and blind holes

• 0.01mm or 0.001mm graduation dial indicators
• Setting ring (code 6312)
• Long handle (code 7352)

• Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 flutes
• Resolution 0.001mm/0.00005"
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• SR44 or LR44 battery, automatic power off
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards
• Optional accessory: data output system

• Deep frame suitable for sheet metal,
• paper and plastic
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces

• Measure tube thickness, shoulder edge distance, rivet head height, etc.
• Supplied with flat anvil and rod anvil
• Graduation 0.01 mm
• Ratchet stop
• Carbide spindle tip
• Setting standards are included (except 0-25 mm)

• Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes
• Graduation 0.01mm
• Ratchet stop
• Carbide measuring faces
• Supplied with setting standards

• Measure the web thickness of drills, small grooves and keyways
• Resolution 0.001mm/0.00005"
• IP54 dust/waterproof
• Button function: on/off, set, mm/inch, ABS/INC, data output
• Data output
• SR44 or LR44 battery, automatic power off
• Ratchet stop
• Carbide tips
• Supplied with setting standards (except 0-25mm/0-1")
• Optional accessory: data output system

• Micrometer head graduation 0.01mm
• Anvil retracting range: 8mm
• Optional indicators: dial indicator, range 10mm, graduation 0.01mm (code 2308-10FA)
• Carbide measuring faces
• Supplied with setting standards (except 0-25mm)

• Graduation 0.01 mm
• Measure width of grooves inside bores
• Non-rotating spindle
• Two graduations for inside and outside measurement