Makita Power TooIs
Pioneers in the industry, we offer makita nibbler jn3201, ga003gm201 cordless angle grinder, makita mlt100 table saw, makita portable cut-off lw1401, makita high pressure washer hw102 and sg1251j wall chaser from India.
Makita Nibbler JN3201
Request Callback
₹ 25850 / Piece Get Latest Price
Product Brochure
| Model Name/Number | JN3201 |
| Material | METAL |
| I Deal In | New Only |
| Continuous rating input | 710W |
| Min. cutting radius | Outside edge : 128 mm (5-1/16") Inside edge : 120 mm (4-3/4") |
| Strokes Per Minute (SPM) | 1,300 |
| Dimensions (L x W x H) | 225x90x254 mm |
| Net weight | 3.4 kg (7.4 lbs.) |
| Power supply cord | 2.5 m (8.2 ft) |
Minimum order quantity: 1 Piece
- Powerful Motor For Continuous Operation In Up To 10 Gauge Mild Steel and 13 Gauge Stainless Steel
- All ball and needle bearings for longer life
- Built-in thickness gauge for operator convenience
- Easy punch and die replacement for less down time
- Low noise level – Just 81 dB
- Lock-On Button enables easy continuous operation
- Ergonomic Soft Rubber Grip design for vibration absorption and comfortable operation
- Common blade with JN3200
- On-tool storage for Hex wrench
- Double insulated
GA003GM201 Cordless Angle Grinder
Request Callback
₹ 45595 / Piece Get Latest Price
Product Brochure
| Disc Diameter | 4 inch |
| Input Power | 40V |
| Warranty | 6 months |
| Brand | Makita |
| No Load Speed | 8500 RPM |
| Model Name/Number | GA003GM201 |
Minimum order quantity: 1 Piece
- Outperforming performance and efficiency similar to corded 1,000 W class grinder
- Genuine solution for high demand industrial applications
- Excellent in continuous heavy-duty work
- In masonry cutting, the max output power is 40% higher than DGA404 series, similar to 9564H series
- High durability; The upsized ball bearings support the rotor to withstand the high power of XGT tool; New switch with reduced contact wear
- New toolless wheel cover allows for fast and easy angle adjustment and installation/removal of wheel cover
- AFT (Active Feedback sensing Technology) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity and increased operator safety
- BL motor delivers 8,500 RPM
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor is electronically controlled to optimize battery energy use for longer run time per charge
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Soft grip provides increased comfort on the job
- Slide switch with lock-on for operator convenience
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Spiral bevel gears for smoother rotations and a more efficient transfer of energy
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- XPT (eXtreme Protection Technology); For use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
- Side handle can be installed on either side of the tool for operator convenience. Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement. Spindle lock for easy wheel changes.
Makita MLT100 Table Saw
Request Callback
₹ 40095 / Piece Get Latest Price
Product Brochure
| Cutting Blade Size | 260 mm (10-1/4") |
| Warranty | 6 months |
| No Load Speed | (RPM): 4,300 |
| Dimensions L x W x H | 726x984x333 mm |
| Type Of Saw | Table Saw |
| Usage/Application | industrial |
| Material | metal |
| Blade Diameter | 260 mm (10-1/4") |
| Capacity | 90: 93 mm (3-5/8") 45: 64 mm (2-1/2) |
| Weight | 34.1 kg (75.2 lbs.) |
| Power supply cord | 2.5 m (8.2 ft) |
Minimum order quantity: 1 Piece
- Large cutting capacity (93 mm (3-5/8″) at 90° and 64 mm (2-1/2″) at 45°)
- Left extension table with smooth sliding action
- Right and rear extension table enables greater cutting capacity
- Safety guard is installable and removable without tool
- On tool storage holds commonly used accessories including: TCT saw blade, Rip fence, Miter gauge etc
- Electric brake for maximum productivity and increased operator safety
- See-through blade guard system for greater visibility of blade and line of cut
- Soft start for smooth start-ups (country-specific)
- Miter gauge with vise
- Storage hooks for power supply cord
- Stand set is available to carry the machine (optional accessories)
- Externally accessible brushes for easy serviceability
- Double insulated
Makita Portable Cut-off LW1401
Request Callback
₹ 13640 / Piece Get Latest Price
Product Brochure
| Blade diameter | 14 inch |
| Machine Type | Metal Cutting Machines |
| Standard Accessories | Cut Off Wheel |
| Model Name/Number | LW1401 |
| Size/Dimension | 355 mm (14") |
| Weight | 18.3 kg (40.3 lbs.) |
Minimum order quantity: 1 Piece
- Powerful 2,200W motor delivers 3,800 RPM for superior performance and durability
- Large cutting capacity; Cuts up to 127 mm (5″) round and 115mm (4-1/2″) x 130mm (5-1/8″) rectangular
- Replacement of Abrasive cut-off wheel and adjustment of Guide plate can be done without any tools. (for LW1400 only)
- Large spark guard prevents backward spark scattering
- Quick release vise for secure stock retention and fast repeated cut offs
- D-shape handle for user comfort
- Carry handle for easy transport to job site
- Pin type saw head locking device for storage and transport (for LW1400 only)
- Chain type saw head locking device for storage and transport (for LW1401 only)
- Shaft lock for easy replacement of abrasive cut-off wheel
- Lock-off button prevents accidental start up. (country-specific)
- Double insulated for operator safety
Makita High Pressure Washer HW102
Request Callback
₹ 8360 / Piece Get Latest Price
Product Brochure
| Pressure | 100 Bar |
| Warranty | 6 months |
| Weight | 5.8 kg (12.8 lbs.) |
| Continuous rating input | 1,300W |
| Max Pressure | 10 MPa (100 bar, 1,450 PSI) |
| Max Flow Rate | 360 L/h |
| High Pressure Hose Length | 5 m (16.4 ft.) |
| Sound Pressure Level | 85.74 dB(A) |
| Vibration Level | 3.72 m/s |
Minimum order quantity: 1 Piece
- Lightweight and compact power washer for home use
- Ideal for cleaning of motorcycles, garden furniture and balconies
- Telescopic trolley handle for added maneuverability
- Plastic type gun is extremely durable
- Thermoplastic type hose
- Quick connection for accessories and hose
- Total Stop System (TSS) switches the motor on and off when the lance trigger is operated, prolonging the motor life
- Rubber tread wheels for better transport over uneven ground to the job
- Comes with 5.5m high pressure soft hose, a lance with adjustable nozzle, a foaming nozzle and detergent tank, and a turbo nozzle
- Inspectable water inlet filter
- Automatic safety valve with low pressure by-pass
- 3 axial-piston wobble-plate pump , universal motor
- Quick connection for accessories
- Accessory holder
- Double insulated
SG1251J Wall Chaser
Request Callback
₹ 38115 / Piece Get Latest Price
Product Brochure
| Disc Diameter | 5 Inch |
| Type Of Power Tool | Wall Chaser |
| Usage/Application | Industrial |
| Material | METAL |
| Warranty | 6 months |
| Model Name/Number | SG1251J |
| Weight | 4.3 kg (9.5 lbs.) |
Minimum order quantity: 1 Piece
- Clean, compact and comfortable
- Offers the most efficient cutting of clean edged grooves for channels
- Ergonomically designed handle for comfort
- Conveniently located front cover efficiently minimizes the dust from spreading, in every cutting depth
- SJS (Super Joint System) feature provides smooth and comfortable cutting by reducing the start up shock and protection from accidental wheel jam
- Constant Speed Control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for more control and longer tool life
- Twin bladed
- Improved easy-to-pull two finger trigger switch
- 9 stage adjustbale cutting width and depth
- Aluminium blade case designed to allow for easy blade replacement
- Connectable to dust extraction systems
- Double insulated
Makita Demolition Hammer HM1306
Request Callback
₹ 44495 / Piece Get Latest Price
Product Brochure
| Weight | 15.1 kg (33.3 lbs.) |
| Brand | MAKITA |
| No Load Speed | 1400 BPM |
| Power Consumption | 1500 W |
| Impact Energy | 25 J |
| Warranty | 6 months |
| Type Of Product | Demolition Hammer |
| Model Name/Number | HM1306 |
| Body Material | aluminum housing |
| Blows Per Minute | 1450 |
Minimum order quantity: 1 Piece
- Chipping performance ensures minimum power loss even when bull point is kept pushed against concrete in chipping operation
- High durability
- Powerful 1,510 W motor to handle the most demanding applications; 1,450 BPM to tackle demanding jobs
- Rubberized soft grip provides more control and less hand fatigue
- Adjustable large side handle improves operator comfort and control
- Lock-on button: easy to operate for both right and left handed users
- Aluminum housing of Makita-blue
- Auto lubrication
- Accepts 30 mm Hex shank
RP2303FC Router Makita
Request Callback
₹ 27500 / Piece Get Latest Price
Product Brochure
| Power | 2100 Watts |
| Model Name/Number | RP2303FC |
| No Load Speed | 9,000 - 23,000 |
| Warranty | 6 months |
| Usage/Application | industrial |
| Weight | 6.2 kg (13.7 lbs.) |
| Carbon Brush | 203 |
| Continuous rating input | 2,100W |
| Collet Capacity | 12 mm (1/2") 12 mm or 13.7lbs. |
| Collet Size | 6, 8, 10, 12 mm (1/4, 3/8, 1/2") |
| Plunge Capacity | 0 - 70 mm (0 - 2-3/4") |
Minimum order quantity: 1 Piece
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Combines power and precision for the most demanding routing applications
- Powerful 2,100 W motor delivers 9,000-23,000 RPM for the most demanding applications
- Constant speed control maintains constant speed under load
- Variable speed control dial enables user to match the speed to the application
- Soft start feature for smooth start-ups
- Electric brake for maximum productivity and increased operator safety
- Deep 0 – 70 mm (0″ – 2-3/4″) plunge depth capacity for easy penetration into work piece
- Linear ball bearings for smooth plunge action and superior performance
- Quick release plunge depth adjustment with micro control along with 3 preset depth stops for added precision
- Dual LED lights with afterglow feature illuminate the work area
- Oversized ball bearing construction for longer tool life
- Ergonomic rubberized handles with built-in large two-finger switch for added control and use
- Conveniently located plunge lock lever for efficient operation
- Shaft lock for quick and easy bit changes
- Tool-less templet guide system for quick and easy installation and removal
- Trigger switch with a lock button for lock-off and lock-on functions
Makita Dust Extractor Attachment with HEPA Filter Cleaning Mechanism DX08
Request Callback
₹ 42000 / Piece Get Latest Price
| Filtration | HEPA Filter |
| Container Volume | 10 L |
| Type | Dust Collector |
| Voltage | 18 V |
| Weight | 3.2 lbs. |
Minimum order quantity: 1 Piece
- DESIGN : OSHA Table 1 compliant on-board dust extractor has a filter cleaning mechanism for optimum suction
- DUST MANAGEMENT : Powered by a separate motor allows rotary hammer to consistently maintain peak drilling performance
- EFFICIENCY : Efficient HEPA filtration system captures 99.97% of particulates .3 microns and larger
- CAPACITY : Two stage extension allows drilling up to 3-1/2" & maximum 7-1/2" deep; up to 1-1/8" diameter holes
- INCLUDES : Dust Extractor Attachment with HEPA Filter
Makita Demolition Hammer HM0870C
Request Callback
₹ 26290 / Piece Get Latest Price
Product Brochure
| Weight | 5 kg |
| Brand | Makita |
| Impact Energy | 16 J |
| Warranty | 6 months |
| Type Of Product | Demolition Hammer |
| Model Name/Number | HM0870C |
Minimum order quantity: 1 Piece
- Compact Power with Less Weight
- Powerful 1,100 W motor delivers 7.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Extended life brushes are longer for more work between service intervals and less downtime
- 12 Bit angle settings allow the bit to be set at different positions for operating convenience
- One-touch sliding chuck for easy bit changes
- Automatic brush cut-off protects commutator from damage for longer tool life
- Rubberized ergonomic soft grip provides more comfort
- Easy-to-operate slide switch
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Increased repairability obtained by using ingenious Brush holder unit for simplified wiring
- Double insulated
Makita Router RP1111C
Request Callback
₹ 23100 / Piece Get Latest Price
Product Brochure
| Power | 1100W |
| Model Name/Number | RP1111C |
| Speed | 8,000 - 27,500 rpm |
| Usage/Application | industrial |
| Warranty | 6 months |
| Continuous rating inpu | 303 |
Minimum order quantity: 1 Piece
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
- Variable speed control dial enables user to match the speed to the application
- Constant speed control maintains constant speed under load
- Soft start feature for smooth start-ups
- Powerful 1,100 W motor delivers 8,000-27,500 RPM for the most demanding applications
- Compact design for precise routing work
- Fine bit depth adjustment for precise routing
- 0 – 57 mm (0″ – 2-1/4″) plunge depth capacity for easy penetration into work piece
- Shaft lock requires one wrench to change bits
- Dust collector can be connected to both upper part and lower part of motor housing
- Trigger switch with a lock button for lock-off and lock-on functions
- Durable cord guard excellent in flexibility to protect power supply cord from disconnection
- Externally accessible brushes for easy serviceability
- Double insulated
HM1213C Demolition Hammer
Request Callback
₹ 14000 / Piece Get Latest Price
Product Brochure
| Brand | makita |
| Type Of Power Tool | Demolition Hammer |
| Usage/Application | Construction |
| Warranty | 6 months |
| Model Name/Number | HM1213C |
Minimum order quantity: 1 Piece
- AVT (Anti Vibration Technology) ensures extra-low vibration performance
- Vibration absorbing handle provides comfortable operation
- Suppression of motor speed during no-load reduces vibration of tool body
- Compact power with less weight
- Powerful 1,510 W motor delivers 18.6 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power light indicates switch failure or cord damage
- Variable speed control dial enables user to match the speed to the application for greater versatility
- Extended life brushes are longer for more work between service intervals and less downtime
- 12 Bit angle settings allow the bit to be set at different positions for operating convenience
- One-touch sliding chuck for easy bit changes
- Automatic brush cut-off protects commutator from damage for longer tool life
- Rubberized ergonomic soft grip provides more comfort
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Soft grip provides more comfort and control
- Increased repairability with simplified wiring and bit holding mechanism
- Double insulated
Makita Nibbler JN1601
Request Callback
₹ 17050 / Piece Get Latest Price
Product Brochure
| Power Tool Type | Nibbler |
| Model Name/Number | JN1601 |
| Material | METAL |
| Continuous rating input | 550W |
| Capacity | Steel up to 400 N/mm : 1.6 mm Steel up to 600 N/mm : 1.2 mm Steel up to 800 N/mm : 0.8 mm Aluminu |
| Min. cutting radius | Outside edge : 50 mm (2) Inside edge : 45 mm (1-3/4) |
| Strokes Per Minute (SPM) | 2,200 |
| Overall Length | 261 mm (10-1/4) |
| Net weight | 1.6 kg (3.6 lbs.) |
| Power supply cord | 2.0 m (6.6 ft) |
Minimum order quantity: 1 Piece
- Handles 16 Ga. Mild Steel and 18 Ga. Stainless
- 2,200 SPM for faster and smooth cutting
- For clean and precise work in keystone plate, deck plate and other sheet materials
- Slim and ergonomic body design for easy gripping
- Die rotates 360°; large 1/4″ stroke
- Extremely light for easy handling
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Easy punch and die replacement for reduced down time
- Externally accessible carbon brushes for easy serviceability
- Double insulated
Makita RP2301FC Router
Request Callback
₹ 25410 / Piece Get Latest Price
Product Brochure
| Power | 1650 W |
| Model Name/Number | RP2301FC |
| No Load Speed | 9,000 - 22,000 |
| Warranty | 6 months |
| Usage/Application | industrial |
| Weight | 6.1 kg (13.5 lbs) |
Minimum order quantity: 1 Piece
- Combines power and precision for the most demanding routing applications
- Powerful 2,100 W motor delivers 9,000-22,000 RPM for the most demanding applications
- Constant speed control maintains constant speed under load
- Variable speed control dial enables user to match the speed to the application
- Soft start feature for smooth start-ups
- Electric brake for maximum productivity and increased operator safety
- Deep 0 – 70 mm (0″ – 2-3/4″) plunge depth capacity for easy penetration into work piece
- Linear ball bearings for smooth plunge action and superior performance
- Quick release plunge depth adjustment with micro control along with 3 preset depth stops for added precision
- Dual LED lights with afterglow feature illuminate the work area
- Oversized ball bearing construction for longer tool life
- Ergonomic rubberized handles with built-in large two-finger switch for added control and use
- Conveniently located plunge lock lever for efficient operation
- Shaft lock for quick and easy bit changes
- Tool-less templet guide system for quick and easy installation and removal
- Trigger switch with a lock button for lock-off and lock-on functions
- Built in fan with labyrinth construction minimizes dust from entering the tool for longer tool life
- Easy-to-read depth scales
- Chip deflector engineered to direct chips away from the operator. Includes extended depth control knob for use when mounted under the table. Can be placed upside down when replacing accessories or not in use. Can be connected to dust extraction system with optional dust nozzle. Externally accessible brushes for easy serviceability. Double insulated
Makita Electric Breaker HM1511
Request Callback
₹ 75075 / Piece Get Latest Price
Product Brochure
| Weight | 20 kg |
| Brand | MAKITA |
| Warranty | 6 months |
| Type Of Product | Electric Breaker |
| Model Name/Number | HM1511 |
| Sound Pressure | 85 dB(A) |
| Sound Power Db | 105 dB(A) |
| Blows Per Minute | 1,300 |
Minimum order quantity: 1 Piece
- 48.9 J AVT SOFT NO LOAD Electric Breaker, 30 mm Hex Shank
- Both drastically increased power and low vibration are achieved with minimum increase in tool size and weight
- Powerful 1,850 W motor delivers 48.9 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications
- Thanks to completely redesigned hammering mechanism and increased motor power as compared with HM1317C series, higher power is achieved with minimum increase in tool size and weight
- Despite the drastically increased power; Anti-vibration housing, Active dynamic vibration absorber and Soft no-load keep the vibration lower than that of HM1317C series, allowing for efficient chipping for a long period
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. power light indicates switch failure or cord damage
- Rubberized ergonomic soft grip provides more comfort
- Soft start suppresses start-up reaction for more precision and better accuracy
- Extended life brushes are longer for more work between service intervals and less downtime
- Automatic brush cut-off protects commutator from damage for longer tool life
- Easy-to-operate slide switch increases productivity and allows for continuous use
- Side handle swivels 360° for greater control
- Double insulated
Makita Lb1200f Band Saw
Request Callback
₹ 53845 / Piece Get Latest Price
Product Brochure
| Cutting Blade Size | 88.15 inches |
| Warranty | 6 months |
| No Load Speed | High: (50 Hz)800 (60 Hz)1,000 m ((50 Hz)2,624 (60 Hz) 3,280 ft) / min Low: (50 Hz)400 (60 Hz)500 m ( |
| Dimensions L x W x H | 615x775x1,600 mm |
| Type Of Saw | Band Saw |
| Usage/Application | industrial |
| Material | metal |
| Capacity | Thickness of cut : 165 mm (6-1/2") Throat : 305 mm (12") |
| Weight | 82 kg (181.2 lbs.) |
Minimum order quantity: 1 Piece
- 305mm Band Saw with high cutting efficiency
- 6 LED job light that illuminate working surface for easier cutting in dark places
- Quick-release tension lever for tool-less easy blade change
- Dust box keeps the work place clean
- Wheeled stand for easier mobility
- High/low speed selection for excellent results in both hard and soft wood
- Anti-restart function prevents accidental startup for safety. (for countries where regulations require it)
DG001GM106 Cordless Earth Auger
Request Callback
₹ 65945 / Piece Get Latest Price
Product Brochure
| Power Tool Type | Cordless Earth Auger |
| Brand | MAKITA |
| Type Of Power Tool | Cordless Earth Auger |
| Warranty | 6 months |
| No Load Speed | High / Low: 0 - 1,500 / 0 - 400 |
| Capacity | Clay Soil: 150 mm / Sandy Soil: 200 mm |
| Usage/Application | industrial |
| Chuck Capacity | 2 - 13 mm (1/16 - 1/2") |
| Max Fastening Torque | High / Low: 55 Nm (136 Nm) / High: 55 Nm (487 In.lbs) / Low: 136 Nm (1,210 in.lbs.) |
| Max Output | 1,350 W |
| Weight | 7.2 - 8.1 kg (15.9 - 17.9 lbs.) |
Minimum order quantity: 1 Piece
- High power similar to AC tool
- Lightweight design for reduced operator fatigue
- Earth auger attachment includes a bar which receives reaction force and an auxiliary handle, and helps the user drill holes in the ground easier
- Reversing switch enables to extract, in reverse rotation mode, an auger bit jammed in soil with high resistance like clay soil
- Auger bit adapter enables to use the auger bits for popular engine earth augers
- BL motor delivers 1,500 RPM
- Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance
- Variable 2-speed (0-400 & 0-1,500 RPM) for increased drilling versatility
- Built-in clutch reduces gear damage by automatically disengaging gears if the bit binds (low speed only)
- Twin LED lights with preglow and afterglow feature illuminate the work area
- Soft start for smooth start-ups
- Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
- Electric brake for increased productivity
- Soft grip
- Auto power-off function
- Front handle
- The same high drilling performance as DDG460
X
Contact Us
Vasant Shekhava (CEO)
IMP Industrial Technologies
Second Floor 221 Galaxy Cinema Road Neelkanth Paradise
Ahmedabad - 382330, Gujarat, India
Send Email