IMP Industrial Technologies

Makita M9511B 5 inch (125mm) Angle Grinder 850 Watt is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinder tools are powered by electricity; either corded or battery powered.

Makita M0900B 4 inch (100mm) Angle Grinder 540 Watt is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinder tools are powered by electricity; either corded or battery powered.

Makita M0910B 4 inch (100mm) Angle Grinder 540 Watt is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinder tools are powered by electricity; either corded or battery powered.

• High dust removal performance similar to corded upright cleaners
• Low noise mode allows for use in noise-sensitive environments such as office, hospital and more
• Two different BL motors, one for vacuuming dust and the other for rotating brushroll
• One-touch 3-suction mode selection switch with mode memory function
• 4-stage brushroll height adjustment
• HEPA Filter is used to capture very fine particles effectively
• Main body able to tilt up to 90 degrees enables to clean in tight spaces under furniture, sofa, bed and more
• Removable aluminum pipe with integrated handle for cleaning in corners or confined spaces
• Tool-less brushroll removal/installation for easy maintenance
• Dust disposal warning lamp/ Brushroll error lamp/ Battery capacity warning lamp
• Brushroll automatically stops when the machine is in the upright position
• LED job light with on/off switch is convenient for cleaning in dark places
• Battery cover protects the battery from dirt, dust and more
• Carrying handle located on the front bottom and back top of the main body
• 18V solution for corded power demands
• Two 18V LXT Li-Ion batteries & BL motors deliver the power and performance for corded demands without leaving the 18V LXT platform
• Two 18V LXT batteries & BL motors generate 1.9 m³/min of Max air flow / 12 kPa of Max sealed suction / 85 W of Suction power
• Delivers up to 120 min of run time using BL1860B
• 5L Large dust bag capacity enables continuous cleaning work. Front bumper protects wall and furniture surfaces from scratches/damages. Battery protection circuit protects against overloading, over-discharging and over-heating

125 mm (5″) 1,400 W Dustless Cutter, Dry Type

• 360° Rotatable Dust Collecting Port for Vacuum Cleaner / Dust Bag Connection
• Compatible with optional guide rail for increased maneuverability
• Dust cover to prevent dust scattering around
• Dust proof switch covered with dust cover prevents contamination of motor
• Powerful 1,400 W motor delivers 12,200 RPM
• Up to 125 mm (5″) diameter diamond wheel can be used
• Wide blade case enables use of curved diamond wheel
• Cuts up to 40 mm (1-9/16″) with 125 mm (5″) wheel
• Powerful cutting in stone, masonry, tile, concrete & more
• Flat motor housing allows tool to stand upright when changing blades
• Large top handle design for increased comfort
• Lock-on button for continuous use operation (for tool with lock-on button)
• Two-stage safety trigger switch prevents accidental start up (for tool with lock-off button)
• On-tool hex wrench for fast and easy blade changes and keeping it from lost
• Externally accessible brushes for greater serviceability
• Double insulated

• General Purpose Drill Featuring Compact And Lightweight Design
• Compact and lightweight, yet with enough power
• Ergonomically designed handle with rubberized soft grip provides more control and comfort
• Chuck capacity: 1.5-10mm (1/16″-3/8″)
• In-line design brings drilling pressure in line with center of drill bit axis
• All ball bearing construction for smooth and durable operation
• Variable speed (0 – 3,400 RPM) for drilling in a wide variety of materials
• Powerful motor with 450W Continuous Input
• Keyed Chuck
• Forward/Reverse switch for easy switching between operating modes
• Lock-on Button for continuous operation
• Lanyard Loop for attachment of lanyard when working at heights
• Double insulated

• Continuous rating input :

  1,200W

• Blade Diameter :

  125 mm (5″)

• Max Cutting Capacity :

  90°: 40 mm (1-9/16″)

• No Load Speed (RPM) :

  12,000

• Vibration Level :

  Concrete Cutting: 5.0 m/s²

• Sound Pressure Level :

  98 dB(A)

• Sound Power Level :

  109 dB(A)

• Dimensions (L x W x H) :

  233x216x166 mm (9-1/8″x8-1/2″x6-1/2″)

• Net weight :

  3.0 kg (6.7 lbs.)

• Power supply cord :

  2.0 m (6.6 ft.)

• Excellent performance in continuous heavy duty applications
• Outstanding drilling speed; Delivers 20% or more higher speed than previous model
• Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
• Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling, fastening and hammer drilling applications
• Compact overall length for easy handling and control
• Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
• Electronical clutch (41/21 settings in Low/High mode) allows for clutch setting in the torque range which cannot be covered with mechanical clutch
• Jog dial for easy adjustment of fastening torque; with digital display for visual confirmation of selected torque
• Electric brake for maximum productivity and increased operator safety
• LED job light with afterglow feature illuminates the work area
• All metal 13 mm self-ratcheting chuck for improved bit gripping strength and durability
• Keyless chuck for quick and easy bit installation and removal
• Depth gauge for increased drilling consistency
• XPT (eXtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh conditions
• Reversing switch is conveniently located
• Durable, reversible belt clip convenient for temporary tool hanging
• Battery protection circuit protects against overloading, over-discharging and over-heating

• 18V LXT BL Brushless Cordless 13 mm (1/2″) 125 N·m (1,100 in.lbs.) Driver Drill
• Increased performance in continuous heavy-duty applications
• Increased max clutch torque enables to adjust clutch torque even when tighteningfasteners into hard material
• Compact and ergonomic design at only 178 mm long
• BL motor delivers 125 N·m of max torque
• BL motor is electronically controlled to optimize battery energy use for longer run time per charge
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• All metal variable 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
• All metal gears and gear housing for maximum job site durability
• All metal 13 mm self ratcheting chuck for improved bit gripping strength and durability
• Lightweight for reduced operator fatigue
• 21 clutch settings and drill mode for added fastening control
• 3-stage LED gauge indicates battery charge level
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Twin LED lights with afterglow feature illuminate the work area
• Electric brake for maximum productivity
• Reversing switch is conveniently located

• Delivers 25% more drilling, driving and fastening speed than previous model
• Aluminum gear housing creates an impression of rigidity and luxuriousness
• Compact and ergonomic design at only 172 mm (6-3/4″) long
• Variable 2-speed (0-500 & 0-2,000 RPM) for a wide range of drilling and fastening applications
• Built-in twin LED lights with pre-glow and afterglow functions illuminate the work area
• BL motor delivers 60 N·m (530 in.lbs.) of max torque
• BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Lightweight for reduced operator fatigue
• 21 Clutch settings and drill mode for added fastening control
• Best possible ergonomic handle with soft grip for driver-drill applications
• All metal gear construction for extra-high transmission durability
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Convenient 13 mm (1/2″) keyless chuck for quick bit changes
• Battery protection circuit protects against overloading, over-discharging and over-heating
• Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
• Electric brake for maximum productivity and increased operator safety
• Reversing switch is conveniently located. Durable, reversible belt clip convenient for temporary tool hanging

• Delivers 91 N·m (810 in.lbs.) of Max Torque
• Mechanical 2-speed transmission (0 – 400 & 0 – 2,000 RPM) covers a wide range of drilling and fastening applications
• Compact design at only 225 mm (8-7/8″) long and lightweight for reduced operator fatigue
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• All metal gears and aluminum gear housing for maximum jobsite durability
• Dual LED lights with afterglow enhanced illumination of work area
• Ergonomic shape fits like a glove with even pressure and easy control
• Soft grip handle provides increased comfort on the job
• Single sleeve keyless chuck allows for easy bit installation/removal
• High power to weight ratio obtained by employing a 4-pole motor
• Battery fuel gauge for increased maneuverability
• Electric brake for maximum productivity and increased operator safety
• Reversing switch is conveniently located
• Durable, reversible belt clip convenient for temporary tool hanging
• Belt clip and bit holder convenient for both right and left-handed users
• Battery protection circuit protects against overloading, over-discharging and over-heating
• 21 clutch settings and drill mode for added fastening control

• Max fastening torque 140 N·m (1,240 in.lbs.)
• LED Job light with pre-glow function
• Variable speed control by trigger for precise fastening in a wide variety of applications
• Ergonomically designed rubberized soft grip provides more control and comfort
• Compact and lightweight design for easy handling and high maneuverability
• Electric brake for maximum productivity and increased operator safety
• The G-series range from Makita is a different lithium-ion battery platform to the Makita LXT range of professional cordless power tools, and is powered exclusively by the G-series battery and DC18WA charger
• Produced to a quality far exceeding that of DIY products, the G-series range offers a comprehensive catalogue of tools at an attractive market price
• The G-Series battery is identifiable by the white or grey top section, and offers a 1.5 amp hour battery capacity in both 14.4V and 18V platforms
• A 60-minute charge time is achieved with the G-Series DC18WA battery charger

• 18V LXT BL Cordless Angle Drill with Keyed Chuck
• Compact and lightweight for increased maneuverability in various work postures and reduced user fatigue
• Hook assembly (anti-drop attachment) also usable as skyhook; Anti-drop strap can be attached
• Mechanical 2-speed transmission; Able to drill large diameter holes in low speed mode; Able to do drilling with 2-9/16″ self-feed bit
• High-speed drilling beyond AC tool
• Powerful drilling even large diameter holes
• Exceptional high power and high speed
• BL motor delivers 1,400 RPM
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Variable 2-speed (0-450 & 0-1,400 RPM) for increased drilling versatility
• Easy-to-grip, ergonomically designed handle with soft grip provides a sure and comfortable grip
• Protection for user’s hand and batteries protects user’s hand and batteries from hitting a material during operation
• Twin LED lights with preglow and afterglow feature illuminate the work area
• Soft start for smooth start-ups
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Electric brake for increased productivity

• Compact Design with a Short Overall Length
• Reliable 10 mm double sleeve keyless drill chuck for easy bit installation and removal
• Mechanical 2-speed gearing; High speed mode for speedy drilling in light duty applications; Low speed mode for heavy duty applications requiring high torque
• Variable speed control by trigger enables user to match the speed to the application
• Rubberized soft grip provides more control and reduced fatigue
• Recessed lock-on button for continuous use
• Reversing switch is conveniently located
• Externally accessible carbon brushes for easy replacement
• Optional hook can be attached
• Double insulated

• Supplied with two socket adapters for compatibility with a variety of sockets
• Equipped with lock-pin style ratchet mechanism is employed, allowing for use as a pass-through ratchet wrench to tighten 13mm nut onto M8 threaded rod
• Easy-to-grip small diameter grip for more comfort and control
• 47.5 N·m (420 in.lbs.) of maximum torque and 0-800 RPM
• Fastens nuts on threaded rods
• Can be also used as a hand ratchet wrench
• LED light with preglow and afterglow functions illuminates the work area
• Forward/reverse rotation change
• Electric brake for maximum productivity
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Battery protection circuit protects against overloading, over-discharging and over-heating

• VR001G series supports a larger vibration part diameter than the current model and transmits vibration to a wider range to improve compaction efficiency thanks to 40Vmax XGT Li-Ion battery and BL motor
• Flexible shafts from ø28 to ø38 are suitable for a wide range of jobsites
• Two power mode selection (normal/power) allows to use the machine for a wide range of jobsites:
  • Power mode: For a wide range of concrete compaction, such as of soil floors, pillars, and mat foundations
  • Normal mode: Ideal for delicate works, such as step finishing or closure of temporary construction openings, where concrete is required not to flow out of the mold
• Without Flexible shaft
• Constant speed control allows for stable compaction work
• Switch cover protects switch trigger and lock-on button from being blocked by adhered and hardened material such as concrete
• Various Battery covers are available for all recommended or compatible batteries
  • The supplied Battery cover is compatible with BL4020/BL4025/BL4040
  • The following Battery covers are also available as an option:
  ∙ Battery case L set for BL4050F/BL4080F
  ∙ Battery case H set for PDC01/PDC1200
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Shoulder strap (sold separately) can be attached
• Ergonomically designed handle fits your hand well
• Lock-on switch reduces hand fatigue in long continuous operation

• Applicable to large diameter rebars
  The tool tip portion of tying mechanism is redesigned from DTR180 to enable to tie large diameter rebars that the current model cannot
• Compatible with thick rebars (D22 x D25)
• Extension handle available as option allows you to operate in a stand-up position, reducing lower back strain
• 6-stage adjustable tying strength
  Tying strength can be adjusted to suit the combination of rebars simply by operating the panel located above the battery
• Tying rebars automatically
• Tying rebars can be done automatically in a various range of applications such as building concrete foundations
• Operable by only one hand, allowing the other hand to be free to adjust the position of rebar
• Continuous actuation mode for efficient continuous tying
• Users can tie rebars by only pulling contact arm against rebars if they continuously hold the trigger
• Users can also tie rebars by pulling the trigger as single actuation mode
• According to the condition of tying material, tying strength can be adjusted in 6 stages
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• BL motor with high power to weight and size ratio
• BL motor generates less heat buildup and is ideal for prolonged use in high production applications
• BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life

• 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
• Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
• Aluminum hammer case + Black bumper
• Simple impact power selection:
  ∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt)
  ∙ 1 T-mode (for thin metal only)
• Max fastening torque: 210 N·m
  • Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
  • Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation
• Light mode
  • To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again
  • The light turns off automatically one hour after turned on
• Excellent performance in continuous heavy-duty operation
  High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
• Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
• One-touch bit installation
  • Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
  • By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit
• Anti-bit wobbling structure
• XPT (eXtreme Protection Technology)
• BL motor
• Soft grip
• Belt clip
• One LED job light each on both sides

• Compact Angle Head Height & Center Height for Use in Close Quarters
• Up to 40% faster drilling and 380% longer runtime*¹
• Slide style battery and improved ergonomic grip
• Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size
• Multi-contact terminals ensure stable contact with battery even under extreme vibration
• Battery protection circuit protects against overloading, over-discharging and over-heating
• LED light with preglow and afterglow feature illuminates the work area
• Variable speed (0-1,100 RPM) for a range of applications
• Easy to operate large type switch trigger
• Conveniently located forward/reverse switch
• 10 mm (3/8″) keyed metal chuck for improved bit gripping power
• On-tool chuck key storage for fast and convenient bit changes
• Chuck key holder can be attached and removed for added maneuverability
• Electric brake for increased productivity
• Durable, reversible belt clip convenient for temporary tool hanging

• Compact Angle Head Height & Center Height for Use in Close Quarters
• Up to 40% faster drilling and 380% longer runtime*¹
• Slide style battery and improved ergonomic grip
• Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size
• Multi-contact terminals ensure stable contact with battery even under extreme vibration
• Battery protection circuit protects against overloading, over-discharging and over-heating
• LED light with preglow and afterglow feature illuminates the work area
• Variable speed (0-1,100 RPM) for a range of applications
• Easy to operate large type switch trigger
• Conveniently located forward/reverse switch
• Single sleeve keyless chuck enables easy bit instlation/removal by one hand
• Electric brake for increased productivity
• Durable, reversible belt clip convenient for temporary tool hanging 

• GYUPPA automatic self-cleaning filter of our unique design allows for constantly high suction power
• Easy filter cleaning simply by tapping dust off of prefilter
• Quiet cleaning because Damper and Prefilter make no noise
• Powerful 1,050 W motor generates 3.5 m³/min of Max air flow / 22 kPa of Max sealed suction
• Approved for Dust Class L in accordance with the EU standard
• For both wet and dry vacuum cleaning
• Best suitable for working with power tools
• Outlet on front for power tools to work with
• Compact and lightweight for high mobility and storage
• 25L Large dust bag capacity enables continuous cleaning work
• Large capacity of on-board storage for convenient storage of the hose, front cuffs, pipes, nozzles and power supply cord
• Simple connection to Makita power tools
• The machine turns on or off automatically when connected power tool is turned on or off
• Flat top design for space saving in storage
• Large bumper protects wall and furniture surfaces from scratches/damages
• Compatible with commercially available plastic bags, allowing for quick and easy dust disposal while also allowing for lower running costs compared to using paper dust bags
• Caster stopper on two rear casters prevent the vacuum cleaner from moving unintentionally during use with power tool or intermission of operation
• Variable suction power control by dial
• Carry handle for easy transport. Increased repairability. Durable latch of plate steel with elastomer lock lever for easy locking/unlocking operation. Optional floor nozzle with change lever allows for easy carpet cleaning (country-specific, E/C# B4238)

Makita M0921B 9 inch (230mm) Angle Grinder 2200 Watt is a handheld power tool that can be used for a variety of metal fabrication jobs that include cutting, grinding, deburring, finishing and polishing. The most common types of angle grinder tools are powered by electricity; either corded or battery powered.

• High performance and durability at less expense
• Delivers a maximum air speed of 87 m/s for faster job site clean up
• Variable speed control dial and trigger (8,500-16,000 RPM) for increased performance
• Maximum air volume of 2.9 m³/min for faster clean up in larger areas
• Ergonomic handle designed for increased operator comfort
• In-line grip for higher maneuverability
• Compact and lightweight for reduced operator fatigue
• On-tool storage for sash nozzle
• Double insulated

• High performance and durability at less expense
• Variable speed trigger allows operator to adjust speed based on materials or application
• Powerful 350 W motor for continuous operation
• In-line positive grip design maximises power thrust
• Compact and lightweight for reduced operator fatigue
• Recessed lock-on button for continuous use
• Reversing switch lever is conveniently located
• Double insulated

• Supplied with Two Socket Adapters for Compatibility with a Variety of Sockets
• Equipped with lock-pin style ratchet mechanism is employed, allowing for use as a pass-through ratchet wrench to tighten 13mm nut onto M8 threaded rod
• Easy-to-grip small diameter grip for more comfort and control
• 47.5 N·m (420 in.lbs.) of maximum torque and 0-800 RPM
• Fastens nuts on threaded rods
• Can be also used as a hand ratchet wrench
• LED light with preglow and afterglow functions illuminates the work area
• Forward/reverse rotation change
• Electric brake for maximum productivity
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Battery protection circuit protects against overloading, over-discharging and over-heating
• Slide style battery and improved ergonomic grip
• Multi-contact terminals ensure stable contact with battery
• Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size

• Powerful 588 N·m (441 ft.lbs.) of Power for Heavy Duty Applications
• Powerful 850W motor delivers 1,700 RPM
• Precision gearing plus ball and needle bearing construction for smooth and efficient power transmission
• Rocker switch for one-handed forward/reverse operation
• Side handle rotates 360° for operator convenience at any angle
• Externally accessible brushes for easy replacement
• Heavy duty rubber bumper in front
• Double insulated
• In Steel carrying case (country-specific)
• Extension bar and Universal joint are optionally available for easy access to bolts in tight spaces

• 10 mm (3/8″) 450 W Variable Speed Reversing Drill with Keyed Chuck

  • General Purpose Drill Featuring Compact And Lightweight Design
  • Compact and lightweight, yet with enough power
  • Ergonomically designed handle with rubberized soft grip provides more control and comfort
  • Chuck capacity: 1.5-10mm (1/16″-3/8″)
  • In-line design brings drilling pressure in line with center of drill bit axis
  • All ball bearing construction for smooth and durable operation
  • Variable speed (0 – 3,400 RPM) for drilling in a wide variety of materials
  • Powerful motor with 450W Continuous Input
  • Keyed Chuck
  • Forward/Reverse switch for easy switching between operating modes
  • Lock-on Button for continuous operation
  • Lanyard Loop for attachment of lanyard when working at heights
  • Double insulated

• Heavy-duty induction motor for high performance and a long, maintenance-free service life
• Large cutting capacity: Max cutting width up to 315 mm (12-3/8″)
• Powerful 2,000 W motor delivers 3,400 RPM for fast cutting
• Suitable for cutting concrete form plywood in the harsh operating environment
• Left extension sub-table is provided
• Bevel cuts 0° – 45° for the most common cutting applications
• Rip fence (Guide rule)
• Two wheeled legs and two carry handles for easy mobility
• Connectable to a vacuum cleaner

• The same high power as corded vacuum cleaners
• Powered by 40Vmax XGT Li-Ion battery (two in parallel); Automatically switches to the second battery when the first battery runs out
• Variable suction power control dial (stepless) allows for a wide range of applications from “High power” to “Quiet” cleaning
• Excellent Vacuum performance equivalent to Corded models achieved by improving cooling efficiency against more heat generation from electrical parts due to the increased output power
• Disturbing noises like wind noise have been reduced by suppressing the transmission of motor vibration with anti-vibration rubber and redesigning the exhaust air flow path of the motor to reduce wind noise
• IPX4-rated water-resistance
• HEPA Filter is used to capture very fine particles effectively
• Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
• Compatible with the current MAKPAC adapter; Battery can be removed/ installed even when the adapter is attached
• Flat top design for space saving in storage
• Carry handle for easy transport
• 120 mm large rear wheels for increased stability
• Developed as a vacuum cleaner for the building maintenance industry
• Compact tank reduces the overall height of the cleaner
• Rear wheels attached to the tank have been increased in size to reduce the risk of the machine from tipping over and to enhance the stability of straight running
• Filter type: Filter cage + Cloth filter
• Caster locking mechanism